Het volgende staat in de user manual.
SELECTING ANALOG AUDIO INPUT OR DIGITAL AUDIO INPUT
If you have already assigned the digital inputs, you can temporarily select the audio input mode for each input source as following procedures. Press the AMP button and press the A/D button. When this button is pressed, the input mode is switched in the following sequence.
Auto → HDMI → Digital → Analog → Auto
Auto mode:
The types of signals being input to the digital and analog input jacks for the selected input source are detected automatically. If no digital signal is being input, the analog input jacks are selected automatically.
HDMI mode:
HDMI mode can be selected only when an HDMI input has been assigned as an input source. When "HDMI Audio" under Preference of the Setup Menu is set to "Through", the HDMI mode cannot be selected.
Digital mode:
The input signal is fixed to an assigned digital input
terminal.
Analog mode:
The analog input jacks are selected./i]
Is er iemand die dit werkend heeft gekregen?
En welke input en output heb je hiervoor gebruikt?