Citaat van: Xplod op september 15, 2010, 21:59:13
Mijn SR5004 is reeds 2 maal in protect mode gegaan en toch heb ik hem er met de juiste toetsencombinatie al 2 maal uit gekregen. [...]
Vreemd is toch wel dat dit NIET in de manual vermeld staat ... vind ik persoonlijk toch een minpuntje
Heb hier de manual van de amerikaanse versie voor mij, en op pagina 82 staat iets over GENERAL MALFUNCTION en HOW TO RESTART THE UNIT:
GENERAL MALFUNCTION
If the equipment malfunctions, this may be because
an electrostatic discharge or AC line interference
has corrupted the information in the equipment
memory circuits. Therefore:
- disconnect the plug from the AC line supply
- after waiting at least three minutes, reconnect
the plug to the AC line supply
- re-attempt to operate the equipment
MEMORY BACKUP
In case a power outage occurs or the power cord
is accidentally unplugged, this unit is equipped with
a backup function to prevent memory data such as
the preset memory from being erased.
HOW TO RESET THE UNIT
SURR. MODE CLEAR
Should the operation or display seem to be abnormal,
reset the unit with the following procedure.
This unit is turned on, press and hold the SURR.
MODE + CLEAR buttons simultaneously for 3
seconds or more.
Remember that the procedure will reset the settings
of the function selector, Surround mode, delay time,
TUNER PRESET etc., to their initial settings.