Hee Wilfred,
Oorspronkelijke vraagstelling was bedoeld om te zien hoe de High Level ingang aangesloten moest worden :
Standard Connection (
Class A, B, A/B amps)
The standard high-level hook up procedure is: attach the red wire to the amplifier's right positive speaker output terminal; attach the yellow wire to the amplifier's left positive speaker output terminal;
attach the black wire to whichever of the amplifier's ground output terminals is convenient.
REL High Level Connection When Used with
Class D AmplifiersWhy? Don't they just hook up like usual and you connect the red and yellow leads to the hot binding posts and black to ground?
In a word, "No" and this has nothing to do with REL and everything to do with how most Class D amps are designed. For whatever reason, the vast majority of Class D amps do not reference their Black speaker return terminals to ground, a convention that has been in place pretty much since audio was created
EASY SOLUTION: Always float the ground on the REL High Level when used with Class D amps. Correct,
do NOT connect the Black ground wire on the REL High Level Cable.
High Level Connection with all those new Class D amps.
When floating the black wire, please cut the bare wire off and tape the end to insulate it against accidental .
Ik ga er van uit dat als de fabrikant zo stellig aanraad om de high level ingang te gebruiken en daar ook de voor bestemde kabels meegeleverd dit toch aan te raden is, zie ook het advies van Rel in mijn voorgaande bericht.
Zoals eerder ook door mij vermeld geld dit niet voor de meeste subwoofers, doch in ieder geval wel voor de Rel subwoofers uit de T-serie.
Groetjes Patrick.
