Het meest voor de hand liggende is de zwaardere belasting van de tip, hetgeen logisch is voor DJ-gebruik. Dat maakt het voor DJ-en wat stabieler. Er zit ook verschil in het frequentie bereik, hetgeen zich in de klank uit (hoorbaar).M.a.w. je levert een beetje kwaliteit in met de DJ-spijker.
Ortofon Pro (silver)
•Output voltage at 1000 Hz, 5cm/sec. 5 mV
•Channel balance at 1 kHz 2 dB
•Channel separation at 1 kHz 20 dB
•Channel separation at 15 kHz 15 dB
•Frequency range at - 3dB 20-20.000 Hz
•Frequency response 20-18.000 Hz + 3 / - 2 dB
•FIM distortion at recommended tracking force, DIN 45.542 < 1%
•Tracking ability at 315Hz at recommended tracking force 70 µm
•Compliance, dynamic, lateral 7 µm/mN
•Stylus type Spherical
•Stylus tip radius R 18 µm
•Equivalent stylus tip mass 0,5 mg
•Tracking force range 3,0-5,0 g (30-50 mN)
•Tracking force, recommended 4,0 g (40 mN)
•Tracking angle 20°
•Internal impedance, DC resistance 750 Ohm
•Internal inductance 450 mH
•Recommended load resistance 47 kOhm
•Recommended load capacitance 200-600 pF
•Cartridge color, body/stylus Silver/Silver
•Cartridge weight 18,5 g
•Replacement stylus unit PRO
Ortofon OM5E Technical Data
•Output voltage at 1000 Hz, 5cm/sec. 4 mV
•Channel balance at 1 kHz 2 dB
•Channel separation at 1 kHz 22 dB
•Channel separation at 15 kHz 15 dB
•Frequency range at - 3dB 20-25.000 Hz
•Frequency response 20-20.000 Hz ± 2 dB
•Tracking ability at 315Hz at recommended tracking force *) 65 µm
•Compliance, dynamic, lateral 20 µm/mN
•Stylus type Elliptical
•Stylus tip radius r/R 8/18 µm
•Tracking force range 1,5-2,0 g (15-20 mN)
•Tracking force, recommended 1,75 g (17,5 mN)
•Tracking angle 20°
•Internal impedance, DC resistance 750 Ohm
•Internal inductance 450 mH
•Recommended load resistance 47 kOhm
•Recommended load capacitance 200-600 pF
•Cartridge colour, body/stylus Black/Black
•Cartridge weight 5 g
•Replacement stylus unit Stylus 5 E
