Kabels en connectors ....

Gestart door tbanis55, april 03, 2020, 09:34:51

Vorige topic - Volgende topic

0 leden en 1 gast bekijken dit topic.

tbanis55

Over kabels en connectors is het nodige te vertellen en te schrijven.
Over de zin en (vooral) onzin hierbij een stukje proza - voor sommigen helaas in het engels - maar geeft een duidelijk beeld over deze materie.

m.v.g.

Ton

10 Audio Cable Myths and Facts


In a sea of audio cable industry snake oil, we're sure you're wondering, What really matters when buying cables?Save your money by avoiding overpriced cables with outlandish claims. Below are some common myths to look out for and some important things to consider when buying audio cables.

CABLE MYTHS1. Conductor skin effect
In some applications like power transmission lines, an electric signal tends to travel through the surface of a conductor and avoids traveling through the center of the conductor. Many cable companies claim that their design limits the skin effect and measurably improves your sound.

The TruthWhile skin effect is a very real issue for large scale power transmission, audio signals are in such a low-frequency range that the skin effect is negligible at best. The skin effect is only an issue in high-frequency applications. 20kHz is the highest frequency that humans can hear. If we calculate the skin effect on a 12 AWG speaker cable like Gene from Audioholics does in this article, we find that the skin effect results in a loss of only -.014dB. Your speakers, room acoustics, and the human ear have a much larger effect on your sound than the skin effect.
2. Cable break-in
Don't be fooled - any company that claims this thinks they can trick you into hearing better sound after a month or two. "Break-in" is a commonly used term throughout the industry. It is the idea that the dielectric of a cable changes and aligns itself to the electromagnetic field of the signal traveling through the conductors.

The Truth

There is no scientific evidence to support the idea of cable break-in, but there are still those who claim it improves sonic qualities. We're not against optimism. We're just not full of crap. Don't drink the audio industry kool-aid and save your money for legitimate cables.


3. Cryogenic treatment
Cryogenic treatment is the process of freezing cables to -320 degrees Fahrenheit before use. The claim is that freezing the conductors of the cable at ultra low temperatures aligns the crystalline grain structure of them resulting in desirable improvements.

The Truth

Again there is no scientific data to support this notion. Cryogenic treatment can improve the durability of certain metals, usually steel, by stabilizing impurities. For example, the process is used to create strong tools or car parts. 

But, steel is a terrible metal to use for audio cables. It is one of the least conductive metals out there! Copper and silver are the best conductors of electricity and the preferred metals for audio cables.


4. Cable signal direction
You might hear this phrase tossed around quite a bit. It's the notion that a cable has an established signal direction, the direction in which it was initially used, and that this signal direction should not be reversed.

The Truth

The reality is, assuming the connector ends and terminals are the same, the cable will work in both directions and the performance will be equivalent.

5. Cable elevators, risers, or lifts


The claim is that the cables' magnetic field can interfere with the surface it is laying on. Essentially, the magnetic field can "reflect" from the surface back into the cable and cause distortions.



The Truth
There is no evidence to support these claims, and these unnecessary devices are merely for looks. They are in no way proven to improve cable performance. 

CABLE FACTS1. Shielding is Important
In the modern age, wireless signals are all around us all the time. The rapid growth and spread of technology means that these wireless signals will become more widespread and more likely to cause unwanted interference. Cellphones, wifi, and Bluetooth signals can enter your cables, but shielding can block these signals and preserve your sound quality.

2. Length is a Factor
No matter how well a cable is designed, cable length will always impact performance. As the length of a cable goes up, so does the risk of unwanted interference and signal loss. We always recommend keeping your cables as short as possible, but we understand that is not always possible. A well constructed and shielded cable will help combat this issue.

3. Conductor material plays a role
The best conductors to use for audio cables are pure silver or pure copper. Both are valued for their high conductivity, but copper is more widely used due to the high price of silver. Additionally, some variations are constructed with silver-plated copper. However, because the metals have different conductivities, the sound is more likely to travel through only the silver plating and not the copper.

The purity of the conductor will affect performance more than anything. Look for Oxygen-Free High Conductivity (OFHC) conductors. This means that a significant percentage of oxygen and other impurities have been removed from the conductor resulting in high purity. 

4. Wire gauge should not be overlooked
The amount of wattage your system is using will determine the total gauge size needed for safe and optimal performance. The standard is 14 gauge wire minimum for the transmission of 250 watts of power. Many electronic devices use much less than this, but some speakers and listening setups may be using more. If your system uses more than 250 Watts, we recommend a higher total gauge cable.

5. Quality connectors matter
Truly, the best connectors are no connectors at all. But, if you can't hardwire your system, gold plated connectors are the industry standard. Gold plating exhibits great corrosion resistance when exposed to oxygen and has good conductive properties. Connectors range from basic to extremely high end and flashy.

The bottom line is:
Choose connectors based on your personal needs and the type of connection being made. Overall, always choose quality connectors. 

We hope these myths and facts will help you choose quality, reasonably priced cables to complete your listening room, studio, or whatever your setup may be.

Share your setup with us in the comments below!

renes59

Buizen vv en ev, Marantz SA7001, Marantz CD6000oseKI, Marantz CD60, Marantz ST6000, Thorens TD160 mkII met een Ortofon MC3Turbo, B&W CDM7NT, JMR Sonata, Mission M51.

SB_Marantz

Een hoop kwats inderdaad Ton.
Kanttekening over de bussen en connectoren.
Vroeger was het nikkel en dat oxideert niet.
Ja misschien over 40 jaar.......ben een ervaringsdeskundige en heb apparaten ouder dan 40 jaar ...o.a. de buizen modellen.

Gold plated: Mijn oude PM-80 (1989 nieuw gekocht) had last van geoxideerde cinch bussen .....toen repareerde ik nog niet maar met boeren verstand de cinch bussen schoongemaakt en voila weer storingsvrij.



Facts count.




CLASSICMARANTZ@GMAIL.COM

Simon_Jaarsma

#3
Ik zie het vaak een probleem worden bij USA made Marantz. Vaak keramiek van binnen en dat begint af te brokkelen. Ook komt er eens soort roest laag om de buitenkant. Dit heb ik bijvoorbeeld met mijn 3800. Japans heeft hier geen last van. Enige manier om dat op te lossen is om het dood weg te vervangen.
VintageStereo op YT

MPX

Ik dacht dat onnodig quoten niet meer de bedoeling was, moderator op vakantie?

Cornelis1921

Ja @MPX, de moderators zijn er even een jaartje tussen uit, want jij maakt hun taak immers overbodig. ;-) :-D
* CD6006 * SA8003 * PM8005 * Quantis QE317 * Harbeth HL-P3ES-2 * Epos stands * Beyer DT880 Premium 250Ω * Senn HD25 II Aluminium * Pro-Ject Headbox S * Nintendo Switch *

MPX

Wat zit je dwars Cornelis, gooi het maar in de groep.
Een moderator maakt een standpunt over onnodig quoten en doet er vervolgens niets aan.
Dan kunnen ze mij wel een lul vinden maar ik kaart alleen maar aan wat op veel fora als irritant wordt bevonden.

Simon_Jaarsma

VintageStereo op YT

Cornelis1921

@MPX, dit forum staat bekend als gemoedelijk, en dat zijn de moderators eveneens. Men maakt hier niet van zulke scherpe punten als op de grotere fora, waar dat meer en vaak wel nodig is. De omvang van dit forum maakt dit forum juist zo gemoedelijk, daarom valt jouw opmerkingen een beetje in het water,, denk ik. Overigens heb je wel gelijk en ik houd sindsdien zoveel mogelijk rekening met het gezegde hierover als het gaat om het quoten van mijn kant. Wat ik al zei, no hard feelings, MPX. Het staat slordig en maakt het geheel minder goed duidelijk en leesbaar. Ben ik uiteindelijk met je eens. Doch de verleiding is groot, zoals je nog wel ziet. Ik ben waarschijnlijk iemand die snel leert en bereid is tot. Ik houd van een geintje maar niet van ruzie. Vandaar. Kan soms pesterig overkomen, ben het niet echt. Groetjes van Cor.
* CD6006 * SA8003 * PM8005 * Quantis QE317 * Harbeth HL-P3ES-2 * Epos stands * Beyer DT880 Premium 250Ω * Senn HD25 II Aluminium * Pro-Ject Headbox S * Nintendo Switch *

xander32

En gvd weer die k@t Cor die hier een beetje de boel loopt te bestieren op zo'n halfzachte wijze 🤬. Dat moet verdømme een keer afgelopen zijn hier. Ben er echt helemaal klaar mee 😤🤯

De zweep er over, weg met die gasten die willens en wetens zitten te stoken in een goed huwelijken die Rene59 en SB_Marantz zijn geen haar beter 😖



















😄

renes59

Citaat van: Cornelis1921 op april 03, 2020, 16:01:35
Ja @MPX, de moderators zijn er even een jaartje tussen uit, want jij maakt hun taak immers overbodig. ;-) :-D
:gp:
Niets irritanter dan iemand die voortdurend onnodig dingen post, kunnen we missen als processierupsen.
Buizen vv en ev, Marantz SA7001, Marantz CD6000oseKI, Marantz CD60, Marantz ST6000, Thorens TD160 mkII met een Ortofon MC3Turbo, B&W CDM7NT, JMR Sonata, Mission M51.

renes59

#11
Citaat van: xander32 op april 03, 2020, 17:41:24
En gvd weer die k@t Cor die hier een beetje de boel loopt te bestieren op zo'n halfzachte wijze 🤬. Dat moet verdømme een keer afgelopen zijn hier. Ben er echt helemaal klaar mee 😤🤯

De zweep er over, weg met die gasten die willens en wetens zitten te stoken in een goed huwelijken die Rene59 en SB_Marantz zijn geen haar beter 😖



















😄
:-D
Oeps, onnodige quote
Buizen vv en ev, Marantz SA7001, Marantz CD6000oseKI, Marantz CD60, Marantz ST6000, Thorens TD160 mkII met een Ortofon MC3Turbo, B&W CDM7NT, JMR Sonata, Mission M51.

Simon_Jaarsma

VintageStereo op YT

Vinyl_Fuchs

#13
De termen mierenneuker/ muggenzifter of strepenrijder komen spontaan in mij op. Of was het toch zonder die "n". Nee, toch met.
Main set up:
Vv.: Nat Audio Plasma R; E.v. 2x Nat Audio Se1 Mk II; Sacd-speler: Sony scd555 ES met art-speakmod.; Platenspeler: Denon SL 7D; Element: Denon DL-A100; Phono: ASR Audio Basis Exclusive X2; Marantz ND8006; AKG Q701; LS: Klipsch La Scala ALK.

renes59

Buizen vv en ev, Marantz SA7001, Marantz CD6000oseKI, Marantz CD60, Marantz ST6000, Thorens TD160 mkII met een Ortofon MC3Turbo, B&W CDM7NT, JMR Sonata, Mission M51.